DrufelCNC manual

• Content
• Annotation
• NOTICE OF LIABILITY
• 1. Installing DrufelCNC
• 2. DrufelCNC interface
• 3. Run the program
• 4. Customization
• 4.1. Common
• 4.2. Controller Configuration
• 4.3. Axis Setup
• 4.3.1. Calibrate axis
• 4.4. Configure Input Ports
• 4.4.1. Input port diagnostics
• 4.4.2. Hot keys
• 4.5. Configuring output ports
• 4.6. Spindle adjustment
• 4.7. Machine size
• 4.7.1. Size axis
• 4.7.2. Soft limit
• 4.7.3. Home function
• 5. Run the control program (G-code)
• 6. Search tool zero
• 7. Manual control
• 8. Spindle control and cooling
• 9. Assignment of coordinates
• 9.1. Measurement system
• 9.2. Machine coordinates
• 9.3. Work coordinates
• 10. Display 3D model
• 11. Opening HPGL files
• 11.1. Basic parameters of the HPGL file converter
• 11.2. Spindle settings of HPGL file converter
• 11.3. Use step by step
• 12. Generating a G-code from an image

Annotation

This document is the user guide for the DrufelCNC software. The information contained in this document may be modified by employees of the company with the subsequent notification. Your changes are reflected in the document version. The company does not guarantee the absence of errors or typographical errors in this document, but will work to eliminate them, and will also be grateful to everyone who finds them and points to them.
Comments and suggestions to this document are accepted by email: social@drufelcnc.com. Document version - V.1.17.

Back

Content

Next