DrufelCNC manual

• Content
• Annotation
• NOTICE OF LIABILITY
• 1. Installing DrufelCNC
• 2. DrufelCNC interface
• 3. Run the program
• 4. Customization
• 4.1. Common
• 4.2. Controller Configuration
• 4.3. Axis Setup
• 4.3.1. Calibrate axis
• 4.4. Configure Input Ports
• 4.4.1. Input port diagnostics
• 4.4.2. Hot keys
• 4.5. Configuring output ports
• 4.6. Spindle adjustment
• 4.7. Machine size
• 4.7.1. Size axis
• 4.7.2. Soft limit
• 4.7.3. Home function
• 5. Run the control program (G-code)
• 6. Search tool zero
• 7. Manual control
• 8. Spindle control and cooling
• 9. Assignment of coordinates
• 9.1. Measurement system
• 9.2. Machine coordinates
• 9.3. Work coordinates
• 10. Display 3D model
• 11. Opening HPGL files
• 11.1. Basic parameters of the HPGL file converter
• 11.2. Spindle settings of HPGL file converter
• 11.3. Use step by step
• 12. Generating a G-code from an image

9. Assignment of coordinates

To reset the x-axis, click the button . To reset the remaining coordinates, click on similar buttons.
To set your own X coordinate axis, click the digital value of the X coordinate axis . In the field that appears, enter the desired value and click on the button . To cancel the entry, click .
Use the buttons to set more accurate coordinates .

To set the values of the remaining coordinates, use the same action algorithm.
To reset all coordinates, click on the button .
To move the tool to zero coordinates, click .
To go to the coordinates X0 and Y0, click on the button .

Back

Content

Next