DrufelCNC manual

• Content
• Annotation
• NOTICE OF LIABILITY
• 1. Installing DrufelCNC
• 2. DrufelCNC interface
• 3. Run the program
• 4. Customization
• 4.1. Common
• 4.2. Controller Configuration
• 4.3. Axis Setup
• 4.3.1. Calibrate axis
• 4.4. Configure Input Ports
• 4.4.1. Input port diagnostics
• 4.4.2. Hot keys
• 4.5. Configuring output ports
• 4.6. Spindle adjustment
• 4.7. Machine size
• 4.7.1. Size axis
• 4.7.2. Soft limit
• 4.7.3. Home function
• 5. Run the control program (G-code)
• 6. Search tool zero
• 7. Manual control
• 8. Spindle control and cooling
• 9. Assignment of coordinates
• 9.1. Measurement system
• 9.2. Machine coordinates
• 9.3. Work coordinates
• 10. Display 3D model
• 11. Opening HPGL files
• 11.1. Basic parameters of the HPGL file converter
• 11.2. Spindle settings of HPGL file converter
• 11.3. Use step by step
• 12. Generating a G-code from an image

11.3. Use step by step

With the help of "Use step by step" you can set up step-by-step milling (cutting) of models. This will reduce the negative impact on the cutter.

	After this axis position, the step milling algorithm will start. For example after Z = 0.5 mm
	The cutter will move this distance after each cycle through the entire HPGL file. For example, 0.5 mm.
	If necessary, you can set a fixed distance for the last step.

Back

Content

Next