DrufelCNC manual

• Content
• Annotation
• NOTICE OF LIABILITY
• 1. Installing DrufelCNC
• 2. DrufelCNC interface
• 3. Run the program
• 4. Customization
• 4.1. Common
• 4.2. Controller Configuration
• 4.3. Axis Setup
• 4.3.1. Calibrate axis
• 4.4. Configure Input Ports
• 4.4.1. Input port diagnostics
• 4.4.2. Hot keys
• 4.5. Configuring output ports
• 4.6. Spindle adjustment
• 4.7. Machine size
• 4.7.1. Size axis
• 4.7.2. Soft limit
• 4.7.3. Home function
• 5. Run the control program (G-code)
• 6. Search tool zero
• 7. Manual control
• 8. Spindle control and cooling
• 9. Assignment of coordinates
• 9.1. Measurement system
• 9.2. Machine coordinates
• 9.3. Work coordinates
• 10. Display 3D model
• 11. Opening HPGL files
• 11.1. Basic parameters of the HPGL file converter
• 11.2. Spindle settings of HPGL file converter
• 11.3. Use step by step
• 12. Generating a G-code from an image

11.2. Spindle settings of HPGL file converter

	The spindle will turn on when the HPGL file starts executing, the spindle turns off when the HPGL file finishes executing.
	The spindle will only work when milling. This setting is suitable for laser or plasma operation.
	The spindle speed while executing the HPGL file. When using a laser, sets the laser power.
	The direction of rotation of the spindle is counterclockwise when executing the HPGL file. Corresponds to command M04.
	The direction of rotation of the spindle is clockwise when executing the HPGL file. Corresponds to command M03.
	Cooling will be turned on before executing the HPGL file. Corresponds to commands M08 and M07.

Back

Content

Next